Struggling to Install Your Helmet Decal? Here is What You Need to Know

When it comes to finding a new decal for your helmet, you do the best levels of research. Why? Because you know that it’s something you aren’t going to purchase daily. Whether for your football, baseball, lacrosse, or motorbike helmet, the decal must be of the highest quality. So, why play foolish when it is about applying to them? Come on; you don’t want to ruin the decal for a bad installation, do you?

Incompatible decals can be a waste of money because they might not stick on all surfaces. So, when you buy helmet decals sports uniforms from big brands, know that you are installing them right. After all, you cannot buy decals without knowing them.

Talking about a waste of money, this happens if you install a decal in the wrong way. Read this article, and you will get to know about all the steps needed to install it properly.

Easiest Way to Install Helmet Decals in 5 Steps

Remove the Visor - Step 1

First, you need to remove the visor of your helmet. If you have any other attachments like an action camera, remove that. It will make the installation process easier for you.

Clean Up the Surface - Step 2

The surface of your helmet must be free of any wax, grease, or dirt. You can use any soapy water or alcoholic cleaners to ensure that. Also, make sure that your helmet wasn’t painted in the last 36-48 hours. As the decals need a smooth surface, any porous oil paint might cause the installation difficult.

Apply the Decals - Step 3

Now, use your decal sheet to remove the decals in their respective sequence. You will find numbers (#1, #2, #3, etc.) written near each decal. Check out the complete print you ordered and apply them in the proper place.

To apply your decal correctly without having any air bubbles, start pressing the center of the decal with your fingers to the edges. Once you are done, you are good to go with the rest of the pieces.

Trim the Extras - Step 4

Most of the decals come with overhanging around the edges. So, you should use a knife (a very sharp one) to cut along the edges as required. Don’t start piercing the blade without being entirely sure that you chose the right place. The perfect thing to do is to press every area with your finger.

Reinstall the Unscrewed Parts - Step 5

After you are done applying and trimming your decal, you can now add your parts back. And that’s all. Your fresh and cool-looking decals are all ready to roll.

Wrapping Up

Sometimes the decals you bought don’t match in size. In such cases, you should not slide the decal underneath the helmet. It won’t be a good idea, especially if you are looking for a long-term look.

Instead, take some extra time and take off the entire mask. Now, apply the sticker and watch the final look. Doesn’t it look awesome? Trim them with the knife if the sticker covers holes, cracks, or edges. However, the best thing is to buy Helmet Decals and Sports Uniforms from reputed sites. In that way, you will always get what you have ordered.

Return Struggling to Install Your Helmet Decal? Here is What You Need to Know to Best Current Sports News

Top of This Page